Standards in ASTM Volume 04.11 - Building Constructions (I): E 72 - E 1670

ASTM E1057 - 06(2010) - Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
ASTM E1074 - 09 - Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
ASTM E1091 - 08 - Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
ASTM E1105 - 00(2008) - Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
ASTM E1121 - 07e1 - Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
ASTM E1155 - 96(2008) - Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
ASTM E1155M - 96(2008) - Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
ASTM E1185 - 07e1 - Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
ASTM E1186 - 03(2009) - Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
ASTM E1190 - 95(2007) - Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
ASTM E1233 - 06 - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
ASTM E1258 - 88(2008) - Standard Test Method for Airflow Calibration of Fan Pressurization Devices
ASTM E1300 - 09a - Standard Practice for Determining Load Resistance of Glass in Buildings
ASTM E1307 - 10 - Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
ASTM E1334 - 95(2005) - Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
ASTM E1368 - 05e1 - Standard Practice for Visual Inspection of Asbestos Abatement Projects
ASTM E1369 - 07e2 - Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
ASTM E1399 - 97(2009) - Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
ASTM E1410 - 91(2005) - Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
ASTM E1423 - 06 - Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
ASTM E1424 - 91(2008) - Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
ASTM E1425 - 07 - Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
ASTM E1464 - 92(2005) - Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
ASTM E1465 - 08a - Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
ASTM E1480 - 92(2004) - Standard Terminology of Facility Management (Building-Related)
ASTM E1481 - 00a(2008) - Standard Terminology of Railing Systems and Rails for Buildings
ASTM E1486 - 98(2010) - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M - 98(2010) - Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1509 - 04 - Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ASTM E1512 - 01(2007) - Standard Test Methods for Testing Bond Performance of Bonded Anchors
ASTM E1513 - 93(2011) - Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
ASTM E1514 - 98(2003) - Standard Specification for Structural Standing Seam Steel Roof Panel Systems
ASTM E154 - 08a - Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM E1554 - 07 - Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
ASTM E1555 - 08 - Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
ASTM E1556 - 08 - Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM E1557 - 09 - Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
ASTM E1592 - 05 - Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
ASTM E1602 - 03(2010)e1 - Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1605 - 04 - Standard Terminology Relating to Lead in Buildings
ASTM E1612 - 94(2009) - Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM E1613 - 04 - Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
ASTM E1637 - 98(2003) - Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM E1643 - 10 - Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
ASTM E1644 - 04 - Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM E1645 - 01(2007) - Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
ASTM E1646 - 95(2011) - Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
ASTM E1660 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Support for Office Work
ASTM E1661 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
ASTM E1662 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
ASTM E1663 - 03(2010) - Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
ASTM E1664 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
ASTM E1665 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Facility Protection
ASTM E1666 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
ASTM E1667 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
ASTM E1668 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
ASTM E1669 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
ASTM E1670 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
ASTM E1671 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Cleanliness
ASTM E1677 - 05 - Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
ASTM E1679 - 95(2005) - Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
ASTM E1680 - 95(2003) - Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM E1692 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
ASTM E1693 - 95(2005) - Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
ASTM E1694 - 95a(2005) - Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
ASTM E1699 - 10 - Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects
ASTM E1700 - 95(2005) - Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
ASTM E1701 - 95(2005) - Standard Classification for Serviceability of an Office Facility for Manageability
ASTM E1726 - 01(2009) - Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
ASTM E1727 - 05 - Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM E1728 - 10 - Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1729 - 05 - Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E1730 - 09 - Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
ASTM E1745 - 09 - Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
ASTM E1748 - 95(2009) - Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
ASTM E1749 - 10 - Standard Terminology Relating to Rigid Wall Relocatable Shelters
ASTM E1753 - 04 - Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
ASTM E1765 - 11 - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
ASTM E1773 - 10 - Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
ASTM E1775 - 07 - Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
ASTM E1783 - 96(2009) - Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM E1792 - 03(2011) - Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
ASTM E1793 - 05 - Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
ASTM E1794 - 08 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
ASTM E1795 - 04 - Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1796 - 03(2011)e1 - Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1797 - 04 - Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1800 - 08 - Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
ASTM E1801 - 09 - Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
ASTM E1803 - 06 - Standard Test Methods for Determining Structural Capacities of Insulated Panels
ASTM E1804 - 07 - Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E1825 - 06 - Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
ASTM E1826 - 11 - Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
ASTM E1827 - 96(2007) - Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
ASTM E1836 / E1836M - 09e1 - Standard Practice for Building Floor Area Measurements for Facility Management
ASTM E1851 - 09 - Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
ASTM E1857 - 97(2004) - Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
ASTM E1886 - 05 - Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM E1908 - 10 - Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
ASTM E1925 - 10 - Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
ASTM E1946 - 07 - Standard Practice for Measuring Cost Risk of Buildings and Building Systems
ASTM E196 - 06 - Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
ASTM E1974 - 06 - Standard Specification for Shelter, Electrical Equipment S-250/G
ASTM E1975 - 09 - Standard Specification for Shelter, Electrical, Equipment S-280/G
ASTM E1976 - 05 - Standard Specification for Shelter, Tactical, Nonexpandable
ASTM E1977 - 05 - Standard Specification for Shelter, Tactical, Expandable, One-Side
ASTM E1978 - 05 - Standard Specification for Shelter, Tactical, Expandable, Two-Side
ASTM E1979 - 04 - Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
ASTM E1993 - 98(2008) - Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM E1996 - 09 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
ASTM E1998 - 02(2007) - Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
ASTM E2004 - 10 - Standard Test Method for Facing Cleavage of Sandwich Panels
ASTM E2013 - 06 - Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
ASTM E2025 - 99(2006) - Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
ASTM E2026 - 07 - Standard Guide for Seismic Risk Assessment of Buildings
ASTM E2029 - 99(2004) - Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E2068 - 00(2008) - Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
ASTM E2083 - 05(2010) - Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
ASTM E2098 - 00(2006) - Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
ASTM E2099 - 00(2007) - Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
ASTM E2103 - 06 - Standard Classification for Bridge Elements and Related Approach Work
ASTM E2110 - 09e1 - Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
ASTM E228 - 11 - Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM E241 - 09 - Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E283 - 04 - Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E330 - 02(2010) - Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331 - 00(2009) - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E405 - 04 - Standard Test Methods for Wear Testing Rotary Operators for Windows
ASTM E455 - 11 - Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
ASTM E488 / E488M - 10 - Standard Test Methods for Strength of Anchors in Concrete Elements
ASTM E529 - 04(2011) - Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
ASTM E546 - 08 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM E547 - 00(2009) - Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
ASTM E564 - 06 - Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
ASTM E575 - 05(2011) - Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
ASTM E576 - 08 - Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM E605 - 93(2011) - Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM E631 - 06 - Standard Terminology of Building Constructions
ASTM E661 - 03(2009) - Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM E695 - 03(2009) - Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
ASTM E72 - 10 - Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
ASTM E73 - 83(2007) - Standard Practice for Static Load Testing of Truss Assemblies
ASTM E736 - 00(2011) - Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
ASTM E741 - 00(2006)e1 - Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
ASTM E754 - 80(2006) - Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E759 - 92(2011) - Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E760 - 92(2011) - Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E761 - 92(2011) - Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
ASTM E779 - 10 - Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
ASTM E783 - 02(2010) - Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
ASTM E833 - 09a - Standard Terminology of Building Economics
ASTM E859 - 93(2011) - Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
ASTM E864 - 08 - Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E865 - 08 - Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
ASTM E866 - 11 - Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E874 - 10a - Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
ASTM E894 - 88(2010) - Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
ASTM E917 - 05(2010) - Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
ASTM E935 - 00(2006) - Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
ASTM E937 - 93(2011) - Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
ASTM E964 - 06(2010) - Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
ASTM E985 - 00(2006) - Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
ASTM E987 - 88(2009) - Standard Test Methods for Deglazing Force of Fenestration Products
ASTM E990 - 09 - Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
ASTM E997 - 01(2009) - Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
ASTM E998 - 05 - Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method